Cardinal Truck Scale Load Cell

Cardinal Truck Scale Load CellThe heavy capacity series of compression load cells are ideal for multiple load cell compression applications such as motor truck scales, railroad track scales and heavy duty tank weighing systems. These compression load cells are available in 50K-SCA 22680kg, 100K-SCA 45360 kg and 120K-SCA 54430 kg.

Cardinal SCA Truck Scale Load cells are fabricated from stainless steel to provide the ultimate in protection when caustic, corrosive or wet environments are encountered. Load cells are hermetically sealed for absolute water protection (IP68). Each load cell is furnished with stainless steel load buttons on each end, and a 9m integral multiconductor cable secured by a strain relief seal.

Steel or Concrete Weighbridge for Truck Scales?

The structural integrity of the truck scale weighbridge is the single most important consideration in the purchase of any truck scale. A failing weighbridge results in continuous problems that can only be solved with replacement. Rice Lake Weighing Systems standard model truck scales are comprised of beams spaced no further than 12 inches from center line or 8 inches from the edge of one flange to the next. This design ensures that a truck tire is on an I-beam at all times and never between.

Concrete Deck
While a concrete deck needs approximately 21 to 28 days to cure, it offers greater resistance to rust and corrosion from road salt and generally requires less maintenance than steel decks, helping to extend the life of the scale. A concrete surface also yields better traction with rain and snow. Because of their design, concrete decks distribute the load over a wider area than steel decks. Rice Lake SURVIVOR® Series concrete deck truck scales are poured at the job site and typically have cure strength of 4,000 PSI at 28 days. The concrete is reinforced with steel rods and a minimum of two wide-flange main beams and seven wide-flange beams below. The Rice Continue reading